Description
The Gloworm CX takes innovation to a new level. The CX is much more than a well-priced commuter light – the CX takes all-in-one lighting into the future. The CX uses custom replaceable optics to produce a beam perfect for the desired application, for convenience it is USB chargeable and can be mounted seamlessly on the bars or helmet.
Weighing only 200 grams, the CX can be charged whilst being used meaning it can be charged using a dynamo USB device. The CX is OTG (On The Go) capable and can be used to charge other devices, such as your phone or GPS.
The CX has a replaceable battery for extended runtimes and utilises common mounting sytems for ultimate versatility.
Simple convenience!
*CX is not compatible with the TX wireless remote but does include a wired remote
IMT (Intelligent Mode Technology)
Customize Your Light Output – IMT (Intelligent Mode Technology)
IMT defines the Gloworm ethos of versatility
IMT provides the freedom to use the Gloworm light in the default settings or to completely customize for ultimate personalization
Default Settings
Trail Low / Medium / High Special mode: Super Dim
Commute Low / High Special mode: Flash (1 Flash every 2 seconds , Flash pattern is High/Low/High)
Special modes are activated by holding down the button for 2″
this allows the user to conduct any outdoor activity without having to cycle through the special mode and having an interruption of a steady light beam
additionally, the light is shut down by holding the button for approximately 5″
IMT gives you the flexibility of refined programs and modes without needing to access them every time you go from High mode back to low
specs
- 1200 lumens
- IMT Technology
- Aluminium Body
- 200 grams
- Water Resistant (IP65)
- 6800 mAh Li-ion battery
- 2 X Cree S3 XP-G2 LEDS
- Replaceable Optics
- Appx 2 HR runtime on High (light will begin to dim naturally over time and will last for over 3 hours)
- 5hrs battery charge time (dependent on state of charge)
- USB charging
- OTG (On The Go) Charging of other devices
- Bar and Helmet Mount
- Travel Lock Function
- 2 Optic system (Spot/Spot) and (Spot/Wide
what's included
- CX light
- 6800 mAh CX battery (installed in light
- 31.8mm bar mount assembly (quick release with quarter turn)
- helmet mount assembly (made to be used with GoPro – all parts included)
- 4 x Adhesive Velcro Squares
- Hex Tools (1.5mm/3mm)
- zip ties
- 4 x Mount Plate Screws
- Micro USB charge cable
- OTG cable
- Spare Optic (Wide/Spot)
- Generic Instructions
- Silicone Optic Shroud